Gate Titan II Bluetooth Expert for AEG V2, Rear Wiring
Gate Titan II Bluetooth is the flagship Gate electronic trigger unit (ETU) for V2 gearboxes, in the version for AEG replicas with rear wiring and Expert firmware. The optical trigger sensor and the innovative gear sensor provide extremely precise control of every cycle.
Features
- Expert firmware
- For V2 gearbox, rear wiring, AEG
- Integrated Bluetooth 5.2: direct access to settings, telemetry, smartwatch, Statum and other Gate devices
- Patented gear sensor that detects every tooth and the direction of rotation, for very precise cycle control
- Optical trigger sensor: up to 50 sensitivity levels in the first millimeter
- Mechanical protection of the trigger sensors
- Ultra-precise telemetry thanks to the new current sensor
- Pre-cocking adjustable in percentages
- Built-in voltage boost converter, trouble-free operation at low temperatures
- Programmable multifunction port: tracer and sensors in the hop-up chamber, bolt-catch button, single solenoid HPA engine, electric magazine, magazine sensor, flashlight
- GCS app for iOS, Android, macOS, Windows, watchOS, Wear OS
- Deep sleep mode with consumption of only 0.1 mA
Gate Titan II Bluetooth Expert for HPA V2, Front Wiring
Gate Titan II Bluetooth is the flagship Gate electronic trigger unit (ETU) for V2 gearboxes, in the version for HPA systems with front wiring and Expert firmware. The optical trigger sensor and the innovative gear sensor provide extremely precise control of every cycle.
Features
- Expert firmware
- For V2 gearbox, front wiring, HPA
- Integrated Bluetooth 5.2: direct access to settings, telemetry, smartwatch, Statum and other Gate devices
- Patented gear sensor that detects every tooth and the direction of rotation, for very precise cycle control
- Optical trigger sensor: up to 50 sensitivity levels in the first millimeter
- Mechanical protection of the trigger sensors
- Ultra-precise telemetry thanks to the new current sensor
- Pre-cocking adjustable in percentages
- Built-in voltage boost converter, trouble-free operation at low temperatures
- Programmable multifunction port: tracer and sensors in the hop-up chamber, bolt-catch button, single solenoid HPA engine, electric magazine, magazine sensor, flashlight
- GCS app for iOS, Android, macOS, Windows, watchOS, Wear OS
- Deep sleep mode with consumption of only 0.1 mA
Gate Titan II Bluetooth Expert for HPA V2, Rear Wiring
Gate Titan II Bluetooth is the flagship Gate electronic trigger unit (ETU) for V2 gearboxes, in the version for HPA systems with rear wiring and Expert firmware. The optical trigger sensor and the innovative gear sensor provide extremely precise control of every cycle.
Features
- Expert firmware
- For V2 gearbox, rear wiring, HPA
- Integrated Bluetooth 5.2: direct access to settings, telemetry, smartwatch, Statum and other Gate devices
- Patented gear sensor that detects every tooth and the direction of rotation, for very precise cycle control
- Optical trigger sensor: up to 50 sensitivity levels in the first millimeter
- Mechanical protection of the trigger sensors
- Ultra-precise telemetry thanks to the new current sensor
- Pre-cocking adjustable in percentages
- Built-in voltage boost converter, trouble-free operation at low temperatures
- Programmable multifunction port: tracer and sensors in the hop-up chamber, bolt-catch button, single solenoid HPA engine, electric magazine, magazine sensor, flashlight
- GCS app for iOS, Android, macOS, Windows, watchOS, Wear OS
- Deep sleep mode with consumption of only 0.1 mA
Gate Titan V2 Advanced Set, Front Wiring
The Gate Titan V2 Advanced set contains the Titan drop-in MOSFET with Advanced firmware, in the version with front wiring, together with USB-Link. Titan is an electronic unit that replaces the trigger contacts and the cut-off lever, taking full control of the AEG replica.
The device should be installed by an experienced technician.
Features
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
- Programming from the trigger (basic functions), via USB-Link (included) or Blu-Link (sold separately)
Package Contents
- Titan V2 with Advanced firmware (front wiring)
- USB-Link
- USB-A – micro-USB cable (1.5 m)
- USB-C – micro-USB cable (0.6 m)
- Micro-USB – micro-USB cable (0.6 m)
- Installation kit
- Quick start guides (Titan and Blu-Link)
Gate Titan V2 Advanced Set, Rear Wiring
The Gate Titan V2 Advanced set contains the Titan drop-in MOSFET with Advanced firmware, in the version with rear wiring, together with USB-Link. Titan is an electronic unit that replaces the trigger contacts and the cut-off lever, taking full control of the AEG replica.
The device should be installed by an experienced technician.
Features
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
- Programming from the trigger (basic functions), via USB-Link (included) or Blu-Link (sold separately)
Package Contents
- Titan V2 with Advanced firmware (rear wiring)
- USB-Link
- USB-A – micro-USB cable (1.5 m)
- USB-C – micro-USB cable (0.6 m)
- Micro-USB – micro-USB cable (0.6 m)
- Installation kit
- Quick start guides (Titan and Blu-Link)
Gate Titan V2 Basic for V2 Gearbox, Front Wiring
Gate Titan V2 Basic is designed for version 2 gearboxes with front wiring and comes with Basic firmware, which provides the basic functions. Titan is a drop-in MOSFET: an electronic unit that replaces the trigger contacts and the cut-off lever and takes full control of the AEG replica.
The basic functions are programmed from the trigger, and full configuration is done through Blu-Link or USB-Link (sold separately) and the Gate Control Station app. The device should be installed by an experienced technician.
Features
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
Package Contents
- Titan V2 with Basic firmware (front wiring)
- Installation kit
- Quick start guides
Gate Titan V2 Expert Blu Set, Front Wiring
The Gate Titan V2 Expert Blu set is designed for version 2 gearboxes with front wiring and includes Expert firmware with all available functions, plus the Blu-Link Bluetooth adapter. Titan is a drop-in MOSFET: an electronic unit that replaces the trigger contacts and the cut-off lever and takes full control of the AEG replica.
With the included Blu-Link you can wirelessly manage all settings from the Gate Control Station app; USB-Link is sold separately. The device should be installed by an experienced technician.
Features
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
Package Contents
- Titan V2 with Expert firmware (front wiring)
- Blu-Link
- Installation kit
- Connector set
- Quick start guides (Titan and Blu-Link)
- Titan patch
- PIN card
- Debug card
Gate Titan V2 Expert Blu Set, Rear Wiring
The Gate Titan V2 Expert Blu set is designed for version 2 gearboxes with rear wiring and includes Expert firmware with all available functions, plus the Blu-Link Bluetooth adapter. Titan is a drop-in MOSFET: an electronic unit that replaces the trigger contacts and the cut-off lever and takes full control of the AEG replica.
With the included Blu-Link you can wirelessly manage all settings from the Gate Control Station app; USB-Link is sold separately. The device should be installed by an experienced technician.
Features
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
Package Contents
- Titan V2 with Expert firmware (rear wiring)
- Blu-Link
- Installation kit
- Connector set
- Quick start guides (Titan and Blu-Link)
- Titan patch
- PIN card
- Debug card
Gate Titan V2 Expert for V2 Gearbox, Front Wiring
Gate Titan V2 Expert is designed for version 2 gearboxes with front wiring and has Expert firmware with all available functions. Titan is a drop-in MOSFET: an electronic unit that replaces the trigger contacts and the cut-off lever and takes full control of the AEG replica.
The basic functions are programmed from the trigger, and full configuration is done through Blu-Link or USB-Link (sold separately) and the Gate Control Station app. The device should be installed by an experienced technician.
Features
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
Gate Titan V2 Expert for NGRS, Front Wiring
Gate Titan V2 Expert for NGRS is designed for Tokyo Marui Next Generation (NGRS) gearboxes with front wiring and has Expert firmware with all available functions. Titan is a drop-in MOSFET: an electronic unit that replaces the trigger contacts and the cut-off lever and takes full control of the AEG replica.
The basic functions are programmed from the trigger, and full configuration is done through Blu-Link or USB-Link (sold separately) and the Gate Control Station app. The device should be installed by an experienced technician.
Features
- Compatible with Tokyo Marui Next Generation: M4, SCAR-H, SCAR-L, HK416D, HK416C, HK417
- Not compatible with Tokyo Marui Next Generation: 36C Custom, Model 36K, AKS74N, AKS74U, AK102, AK47 Type 3
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
Gate Titan V2 Expert for NGRS, Rear Wiring
Gate Titan V2 Expert for NGRS is designed for Tokyo Marui Next Generation (NGRS) gearboxes with rear wiring and has Expert firmware with all available functions. Titan is a drop-in MOSFET: an electronic unit that replaces the trigger contacts and the cut-off lever and takes full control of the AEG replica.
The basic functions are programmed from the trigger, and full configuration is done through Blu-Link or USB-Link (sold separately) and the Gate Control Station app. The device should be installed by an experienced technician.
Features
- Compatible with Tokyo Marui Next Generation: M4, SCAR-H, SCAR-L, HK416D, HK416C, HK417
- Not compatible with Tokyo Marui Next Generation: 36C Custom, Model 36K, AKS74N, AKS74U, AK102, AK47 Type 3
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
Gate Titan V3 Advanced Set for V3 Gearbox
The Gate Titan V3 Advanced set is designed for version 3 gearboxes with front or rear wiring and includes Advanced firmware together with USB-Link. Titan is a drop-in MOSFET: an electronic unit that replaces the trigger contacts and the cut-off lever and takes full control of the AEG replica.
The basic functions are programmed from the trigger, and through USB-Link (included) you have access to advanced settings in the Gate Control Station app; Blu-Link is sold separately. The device should be installed by an experienced technician.
Features
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
Package Contents
- Titan V3 with Advanced firmware
- USB-Link
- USB-A – micro-USB cable (1.5 m)
- USB-C – micro-USB cable (0.6 m)
- Micro-USB – micro-USB cable (0.6 m)
- Installation kit
- Quick start guides (Titan and Blu-Link)
Gate Titan V3 Expert for V3 Gearbox
Gate Titan V3 Expert is designed for version 3 gearboxes with front or rear wiring and has Expert firmware with all available functions. Titan is a drop-in MOSFET: an electronic unit that replaces the trigger contacts and the cut-off lever and takes full control of the AEG replica.
The basic functions are programmed from the trigger, and full configuration is done through Blu-Link or USB-Link (sold separately) and the Gate Control Station app. The device should be installed by an experienced technician.
Features
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
Gate Titan V3 Expert Blu Set for V3 Gearbox
The Gate Titan V3 Expert Blu set is designed for version 3 gearboxes with front or rear wiring and includes Expert firmware plus the Blu-Link Bluetooth adapter. Titan is a drop-in MOSFET: an electronic unit that replaces the trigger contacts and the cut-off lever and takes full control of the AEG replica.
With the included Blu-Link you can wirelessly manage all settings from the Gate Control Station app; USB-Link is sold separately. The device should be installed by an experienced technician.
Features
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
Package Contents
- Titan V3 with Expert firmware (rear and front wiring)
- Blu-Link
- Installation kit
- Connector set
- Quick start guides (Titan and Blu-Link)
- Titan patch
- PIN card
- Debug card
Gate USB-Link 2 Adapter
Gate USB-Link 2 is a dongle that connects Gate ETU units to PC, Mac and Android devices. Together with the Gate Control Station app it provides full access to the functions and settings of Titan or Aster and allows updating the firmware of the drop-in module and the tactical programming card.
Features
- Connecting Gate ETU to PC, Mac and Android
- Full access to Titan and Aster settings
- Firmware updates
Package Contents
- USB-Link for the GCS app
- USB-C cable (0.6 m)
- Micro-USB cable (0.6 m)
- Debug card
- Quick start guide
Gate Warfet 1.1 MOSFET with Programming Card
Gate Warfet 1.1 is an advanced control system for AEG replicas. Thanks to the mini Tamiya adapter it connects very easily to the original wiring, and configuration is simple with the included tactical programming card.
Features
- Third-generation MOSFET
- Configurable fire selector
- Active brake
- Pre-cocking
- ROF control
- Smart trigger
- Battery protection
- Electronic fuse and smart fuse
- Plug & play
- 1–5 BB burst
- Debouncing, built-in self-test, dark mode
- Protective coating, fixed wiring, Dean-T ready
- Compatible with 14.8 V Li-Po
Package Contents
- Warfet power module
- Tactical programming card
- Mini Tamiya adapter for battery
- Mini Tamiya adapter for AEG
- Pair of Dean-T connectors
- Single wire for trigger
- Dual wire for trigger
- Quick start guide
Gate Warfet Power Module
The Gate Warfet power module is an advanced control system for AEG replicas that connects easily to the original wiring via the mini Tamiya adapter. Configuration is done with the tactical programming card, sold separately.
Features
- Third-generation MOSFET
- Configurable fire selector
- Active brake
- Pre-cocking
- ROF control
- Smart trigger
- Battery protection
- Electronic fuse and smart fuse
- Plug & play
- 1–5 BB burst
- Debouncing, built-in self-test, dark mode
- Protective coating, fixed wiring, Dean-T ready
- Compatible with 14.8 V Li-Po
Package Contents
- Warfet power module
- Mini Tamiya adapter for battery
- Mini Tamiya adapter for AEG
- Pair of Dean-T connectors
- Single wire for trigger
- Dual wire for trigger
- Tactical programming card not included
Gate X-ASR2 MOSFET
Gate X-ASR2 is the newest version of the well-known X-ASR MOSFET. It heats up much less, although it can operate at higher loads, including with M150 springs or stronger. Each time the battery is connected it performs a self-test and signals the operating status and any errors with two LEDs.
Features
- Increased maximum load
- Reduced heating during operation
- LEDs for device status
- Protective conformal coating
- Easy installation, mounted on the connectors
- No reverse polarity protection - be careful when connecting the battery
Package Contents
- X-ASR2
- Debug card
- Connector set
Jefftron II MOSFET with Wiring
The Jefftron II MOSFET is professionally made for electric airsoft replicas (AEG). It increases the rate of fire and extends battery life compared to standard wiring, and pre-soldered wires allow faster installation. Installation should be done by a person experienced in soldering and disassembling replicas.
Features
- Pre-soldered wires: 4 power wires 1.5 mm² (AWG16) with MPPE insulation and 2 signal wires 0.34 mm² (AWG22)
- Conformal-coated board, protected against water
- For springs up to M210
- 6-wire connection
- No current draw at idle
- No sparks at the trigger contacts
- Requires a working cut-off, selector plate, anti-reversal, trigger and trigger lock
Specifications
- Current: 150 A single shot or 50 A burst, max. 30 s
- Batteries up to 17 V (Ni-xx 8.4–12 V, Li-Po 7.4–14.8 V)
- Dimensions: 25 × 12 × 7 mm
Package Contents
- MOSFET with wiring
- Deans T male connector
- 30 A mini fuse
- 4 Faston female terminals 2.8 mm
- 6 black heat-shrink tubes 3.2 mm, length 20 mm
- 3 black heat-shrink tubes 4.8 mm, length 20 mm
- Installation manual in English
Leviathan V3 Optical MOSFET
Leviathan V3 from Jefftron is a processor-controlled MOSFET with optical sensors and wireless communication, for version 3 gearboxes. It integrates fully into the gearbox in place of the original trigger contacts, and all settings are controlled from the smartphone app (iOS and Android).
Features
- New fire modes, independent for each selector position (safe – semi – auto)
- 3 adjustable bursts (2–20 BBs)
- Rate of fire reducible by up to 40%, with fast trigger response
- Active brake with adjustable intensity (can be disabled)
- Pre-cocking for instant firing in semi
- Adjustable delay between shots (0.1–4.0 s)
- Electronic fuse with adjustable sensitivity
- Low battery indicator for Li-Po 2S–4S and Li-Fe 3S–4S
- Statistics: cycle time, motor consumption, rate of fire, MOSFET temperature
- Multiple settings profiles, firmware updates
- Three shot counters and error log
- Current, voltage and temperature monitoring
- Settings are saved to memory immediately
- Modes: safe, semi, semi/burst, binary, burst, burst+burst, burst/full, full
- Easy installation in V3 gearbox, Tokyo Marui standard
- Optical sensor actuated by the sector gear and optical sensor for the selector
- Real Feel Trigger System (RFTS)
Package Contents
- Leviathan V3 MOSFET
- Trigger not included
Replacement Sponge and Screw for Leviathan V2
The replacement set contains the sponge and screw for the Leviathan V2 MOSFET. It is useful when reinstalling or servicing the module in the gearbox.
Package Contents
- Replacement sponge
- Replacement screw
Perun V2 Hybrid MOSFET, Front Wiring
Perun V2 Hybrid replaces the mechanical contacts in the airsoft replica or gel blaster and offers many useful functions. Optical and magnetic sensors eliminate many moving parts prone to failure, and adaptive trigger control allows switching from a very short to a long stroke, even in the field, with almost any trigger, including the original one.
Features
- For V2 gearbox, front wiring
- 5-level adjustable trigger sensitivity, changeable even in the field
- Fire modes programmable independently for both selector positions (safe, semi, burst, auto)
- Active brake against over-rotation (double shot)
- Pre-cocking for fast response, useful in CQB
- 2-stage trigger: semi – burst, semi – auto, burst – auto
- Binary trigger
- Rate of fire reduction
- DMR mode with intervals between semi shots
- Low voltage alarm for Li-Po and Li-Ion
- DSG mode for double sector gear
- Diagnostic system and electronic fuse
- Programming via selector and trigger, with sound signals and multicolor LED
Snow Wolf Electronic Module with BB Counter for M41A
The Snow Wolf integrated circuit assembly with BB counter is a replacement part for Snow Wolf M41A series electric airsoft rifles.
Features
- Integrated circuit with BB counter
- Compatible with Snow Wolf M41A series electric rifles
Specna Arms HAL 2.0 Electronic Control System for V2 Gearbox
Specna Arms HAL 2.0 for V2 gearbox is an electronic control system in which the Hall effect trigger offers sensitivity of up to 500 points and is insensitive to dirt and external light. This version contains only the control unit.
With the free Specna Link app you can quickly adjust the replica parameters and create several profiles.
Features
- Trigger sensitivity adjustment
- Pre-cocking for faster response
- Fire modes: single, binary, burst or auto, assigned to the selector positions
- Adjustable burst length and rate of fire
- Protection of Li-Po/Li-Ion batteries against excessive discharge
- Magazine mode
- Real-time battery level display
- Saving settings for different game modes
- Advanced telemetry and continuous monitoring of the replica
- Integrated Bluetooth Low Energy module
Package Contents
- HAL 2.0 control unit
- Trolley/contact not included
Specna Arms HAL Electronic Control System for V2 Gearbox
The Specna Arms HAL electronic control system is designed for replicas with a V2 gearbox. It uses magnetic sensors and allows the replica to be configured in many ways. For correct operation, the new version of the trigger included in the set must be installed.
Features
- Trigger detection with magnetic sensors and Hall effect
- High sensitivity even with light presses
- High durability and resistance to external factors
- Low/high voltage protection
- Overload protection (automatic shutdown above 40 RPS)
- Active brake, binary trigger
- Adjustable trigger sensitivity (5 levels, 20–100%)
- Adjustable pre-cocking (6 levels)
- Programmable auto modes: full auto, semi, 3 or 5 BB burst
- Programmable semi modes: semi, binary, AUG, sniper
- Easy programming from the trigger, low battery alarm
- Compatible with brushless motors (BLDC)
Package Contents
- HAL electronic control system for V2 gearbox
- Trigger tongue
- Mounting kit
- Selector board V2
- Circuit programming card
Specna Arms HAL Electronic Control System for V3 Gearbox
The Specna Arms HAL electronic control system is designed for replicas with a V3 gearbox. It uses magnetic sensors and allows the replica to be configured in many ways. For correct operation, the new version of the trigger included in the set must be installed.
Features
- Trigger detection with magnetic sensors and Hall effect
- High sensitivity even with light presses
- High durability and resistance to external factors
- Low/high voltage protection
- Overload protection (automatic shutdown above 40 RPS)
- Active brake, binary trigger
- Adjustable trigger sensitivity (5 levels, 20–100%)
- Adjustable pre-cocking (6 levels)
- Programmable auto modes: full auto, semi, 3 or 5 BB burst
- Programmable semi modes: semi, binary, AUG, sniper
- Easy programming from the trigger, low battery alarm
- Compatible with brushless motors (BLDC)
Package Contents
- HAL electronic control system for V3 gearbox
- Trigger tongue
- Mounting kit
- Selector board V3
- Circuit programming card
