79
products
Products
Gate POM Sealed Nozzle 21.40 mm for AEG M4/M16
The Gate POM sealed nozzle, 21.40 mm long, is designed for M4/M16 series airsoft electric replicas (AEG). The improved seal between the nozzle and the hop-up chamber reduces air loss and contributes to more consistent compression and better accuracy.
Features
- Sealed type nozzle
- POM construction, a technical material that is wear-resistant and low-friction
- Compatible with M4/M16 series AEG replicas
Specifications
- Length: 21.40 mm
Gate Aster II Bluetooth Expert for V3 Gearbox, AEG and HPA
Gate Aster II Bluetooth Expert for V3 gearboxes brings new features to all replicas with a version 3 gearbox, both AEG and HPA with dual solenoid. Through Bluetooth 5.2 you get direct access to settings, telemetry and extended functions in the GCS app for phone and smartwatch.
The AEG version works with brushed and brushless motors, even at 11.1 V, and in HPA, single or dual solenoid engines can be connected.
Features
- Bluetooth 5.2, Expert firmware
- Trigger sensitivity adjustment (up to 35 levels in the first millimeter)
- Automatic pre-cocking
- Active brake with adaptive mode
- Binary trigger
- Compatible with brushless motors, even at 11.1 V
- The Aster fuse protects the motor, battery and controller
- Highly reliable optical sensors
- Weather-resistant MIL-V-173C coating
- Free online firmware updates
- Low power consumption
- Compatible with dual solenoid HPA engines: Pulsar D, PolarStar F2
- Compatible with single solenoid HPA engines: Pulsar H, Pulsar S, Wolverine Inferno Gen 2, Wolverine Reaper, PolarStar Jack, Redline N7
Package Contents
- Aster II Bluetooth MOSFET for V3
- Cables for single or dual solenoid are not included
Gate POM Sealed Nozzle 24.00 mm for AEG SR25
The Gate POM sealed nozzle, 24.00 mm long, is designed for SR25 series airsoft electric replicas (AEG). The improved seal between the nozzle and the hop-up chamber reduces air loss and contributes to more consistent compression and better accuracy.
Features
- Sealed type nozzle
- POM construction, a technical material that is wear-resistant and low-friction
- Compatible with SR25 series AEG replicas
Specifications
- Length: 24.00 mm
Gate Aster V3 SE MOSFET
Gate Aster V3 SE is an ETU/MOSFET for version 3 gearboxes with an excellent balance of features and performance. Trigger sensitivity can be set right out of the box, from "hair trigger" to the full stroke, and the main functions are programmed from the trigger and selector.
The smart fuse protects the battery, motor and controller, including when the battery is connected in reverse, while optical sensors replace mechanical contacts that are prone to failure.
Features
- Battery reverse polarity protection
- Proximity sensor for the trigger, up to 315 sensitivity settings
- Configuration via the trigger or via Blu-Link/USB-Link and the GCS app
- Built-in RGB LED for easy programming
- No modification of the gearbox shell required
- Optical sensor compatible with infinite torque-up, DSG, SSG, 19-tooth and standard gears
- Automatic pre-cocking (low, mid, high), adaptive active brake
- Binary trigger as a basic function, brushless motor support
- MIL-V-173C coating
Specifications
- Supply voltage: 3.75–12.9 V (1.2 V during firing)
- Current consumption: 26 mA
- Low-power mode: 285 μA
- Dimensions: 73.5 × 24 × 12.5 mm
- Weight: 26 g
- Operating temperature: -15°C … +50°C
- Relative humidity: ≤ 80%
Gate Pulsar S Nozzle 19.40–19.60 mm for HPA AK47
The Gate Pulsar S nozzle, with a length of 19.40–19.60 mm, is made for AK47 series HPA airsoft replicas equipped with the Gate Pulsar S system. Choosing the correct nozzle length ensures a good seal in the hop-up chamber and correct BB feeding.
Features
- Nozzle dedicated to the Gate Pulsar S system
- Compatible with AK47 series HPA replicas
Specifications
- Length: 19.40–19.60 mm
Gate Aster V3 SE Expert MOSFET
Gate Aster V3 SE Expert is an ETU/MOSFET for version 3 gearboxes with Expert firmware and an excellent balance of features and performance. Trigger sensitivity can be set right out of the box, from "hair trigger" to the full stroke, and the main functions are programmed from the trigger and selector.
The smart fuse protects the battery, motor and controller, including when the battery is connected in reverse, and advanced settings are available through Blu-Link or USB-Link and the GCS app.
Features
- Expert firmware
- Battery reverse polarity protection
- Proximity sensor for the trigger, up to 315 sensitivity settings
- Configuration via the trigger or via Blu-Link/USB-Link and the GCS app
- Built-in RGB LED for easy programming
- No modification of the gearbox shell required
- Optical sensors instead of mechanical contacts
- Optical sensor compatible with infinite torque-up, DSG, SSG, 19-tooth and standard gears
- Automatic pre-cocking (low, mid, high), adaptive active brake, safe – semi – binary selector mode
- Support for brushless motors and heavily modified AEGs
- MIL-V-173C coating
Specifications
- Supply voltage: 3.75–12.9 V (1.2 V during firing)
Gate Pulsar S Nozzle 21.25–21.40 mm for HPA M4/M16
The Gate Pulsar S nozzle, with a length of 21.25–21.40 mm, is made for M4/M16 series HPA airsoft replicas equipped with the Gate Pulsar S system. Choosing the correct nozzle length ensures a good seal in the hop-up chamber and correct BB feeding.
Features
- Nozzle dedicated to the Gate Pulsar S system
- Compatible with M4/M16 series HPA replicas
Specifications
- Length: 21.25–21.40 mm
Gate Blu-Link Bluetooth Adapter
Gate Blu-Link enables wireless management of Gate ETU units through the Gate Control Station app for iOS, Android, Windows and macOS. You can control Aster or Titan from your phone or computer and connect them with other compatible Gate devices, such as the Statum computer mounted on the weapon.
In addition to the Bluetooth 5.0 function, Blu-Link acts as an extra safety fuse and a multifunction wattmeter for constant monitoring of the replica status.
Features
- Bluetooth adapter
- Wireless connection between Gate ETU and compatible Gate devices
- Compatible with the GCS app for iOS, Android and Windows/macOS
- Switching between data transfer mode and firing mode from the app
- Additional configurable smart fuse (UVP, SCP, OCP, OTP)
- Multifunction wattmeter for reading telemetry data
- MIL-V-173C coating
- Very low power consumption
- Can stay connected between the ETU and the battery throughout the game
- Allows programming, changing settings and updating the firmware of Titan and Aster
Gate Pulsar S Nozzle 23.80–24.00 mm for HPA SR25
The Gate Pulsar S nozzle, with a length of 23.80–24.00 mm, is made for SR25 series HPA airsoft replicas equipped with the Gate Pulsar S system. Choosing the correct nozzle length ensures a good seal in the hop-up chamber and correct BB feeding.
Features
- Nozzle dedicated to the Gate Pulsar S system
- Compatible with SR25 series HPA replicas
Specifications
- Length: 23.80–24.00 mm
Gate MERF 3.2 MOSFET
Gate MERF 3.2 is an advanced control system for AEG replicas, a third-generation MOSFET with a configurable fire selector and active brake. It installs plug & play and protects both the contacts and the battery.
Features
- Third-generation MOSFET
- Configurable fire selector
- Active brake
- ROF control
- Smart trigger
- Battery protection
- Electronic fuse
- Plug & play
- 3 BB burst
- Debouncing
- Protective coating
- Fixed wiring, Dean-T ready
Package Contents
- MERF 3.2
- Additional Dean-T connector kit
- Single signal wire for trigger contacts
- Dual signal wire for trigger contacts
- Programming button
Gate PicoAAB MOSFET with Active Brake
Gate PicoAAB is the smallest third-generation MOSFET with an active brake in the Gate range. It protects the trigger contacts, and the active brake quickly stops the motor after each cycle.
Features
- Third-generation MOSFET
- Active brake
- Electronic fuse
- Debouncing
- Protective coating
- Fixed wiring
- Compatible with 14.8 V Li-Po
Package Contents
- PicoAAB MOSFET
- Single signal wire for trigger contacts
- Dual signal wire for trigger contacts
- 2.8 × 0.8 mm male terminal with red heat-shrink tube (battery plus)
- 2.8 × 0.5 mm male terminal with black heat-shrink tube (motor minus)
- 2.8 × 0.5 mm male terminal with red heat-shrink tube (motor plus)
- 2.8 × 0.5 mm female terminal with thin black heat-shrink tube (battery minus)
Gate PicoSSR 3 MOSFET
Gate PicoSSR 3 is the smallest advanced AEG control system in the world, very powerful despite its small size. Heat-shrink tubes protect it against adverse weather conditions.
Features
- Third-generation MOSFET
- Fixed wiring
- Weather resistant thanks to heat-shrink tubes
- Not compatible with micro-switches
Specifications
- Dimensions: 4 × 6 × 21 mm
- Maximum nominal battery voltage: 12.8 V
Package Contents
- PicoSSR 3
- 2 single signal wires for trigger contacts, 60 cm each
- 3 heat-shrink tubes
Gate Programming Button for MERF 3.2 and NanoHARD
The Gate programming button allows configuration of Gate MERF 3.2 and NanoHARD controllers. It is a useful accessory if you have lost the original button or want a spare.
Features
- Compatible with Gate MERF 3.2 and NanoHARD
Gate Statum Tactical Computer with Blu-Link, Dark Earth
The Gate Statum tactical computer mounts on the replica and connects to the electronic trigger unit, displaying all important data in real time: remaining BBs, battery level, fire mode and more. The set also includes the Blu-Link adapter.
Features
- Connects to the replica electronic trigger units for complete real-time data
- 128 × 128 px OLED display with adjustable brightness
- Polycarbonate window coated with 3mk FlexibleGlass
- CNC-machined 7075 aluminum body, IP68 water and dust resistant, MIL-STD-810H standard
- Mounts on standard 20 mm rails
- 3-axis accelerometer and gyroscope
- Bluetooth 5.0 connection
- 850 mAh Li-Po battery, USB-C port
- 4 customizable dashboards
- Functions: remaining BB counter, AEG battery level, estimated remaining shots, magazine counter, tilt indicator, bolt-catch reset, temperature, distance/pedometer/calories, fire mode notification, mission/respawn timer
- Compatible with Titan V2 / V2 NGRS / V3, Aster V2 / V3, Blu-Link, Basic / Advanced / Expert firmware; not compatible with GCS PC/Mac 2.x and basic MOSFETs
Specifications
- Dimensions: 47 × 60 × 54 mm
- Weight: 180 g
- Color: dark earth
Package Contents
- Statum tactical computer
- Blu-Link adapter
Gate Statum Tactical Computer with Blu-Link, Black
The Gate Statum tactical computer mounts on the replica and connects to the electronic trigger unit, displaying all important data in real time: remaining BBs, battery level, fire mode and more. The set also includes the Blu-Link adapter.
Features
- Connects to the replica electronic trigger units for complete real-time data
- 128 × 128 px OLED display with adjustable brightness
- Polycarbonate window coated with 3mk FlexibleGlass
- CNC-machined 7075 aluminum body, IP68 water and dust resistant, MIL-STD-810H standard
- Mounts on standard 20 mm rails
- 3-axis accelerometer and gyroscope
- Bluetooth 5.0 connection
- 850 mAh Li-Po battery, USB-C port
- 4 customizable dashboards
- Functions: remaining BB counter, AEG battery level, estimated remaining shots, magazine counter, tilt indicator, bolt-catch reset, temperature, distance/pedometer/calories, fire mode notification, mission/respawn timer
- Compatible with Titan V2 / V2 NGRS / V3, Aster V2 / V3, Blu-Link, Basic / Advanced / Expert firmware; not compatible with GCS PC/Mac 2.x and basic MOSFETs
Specifications
- Dimensions: 47 × 60 × 54 mm
- Weight: 180 g
- Color: black
Package Contents
- Statum tactical computer
- Blu-Link adapter
Gate Statum Tactical Computer, Dark Earth
The Gate Statum tactical computer mounts on the replica and connects to the electronic trigger unit, displaying all important data in real time: remaining BBs, battery level, fire mode and more.
Features
- Connects to the replica electronic trigger units for complete real-time data
- 128 × 128 px OLED display with adjustable brightness
- Polycarbonate window coated with 3mk FlexibleGlass
- CNC-machined 7075 aluminum body, IP68 water and dust resistant, MIL-STD-810H standard
- Mounts on standard 20 mm rails
- 3-axis accelerometer and gyroscope
- Bluetooth 5.0 connection
- 850 mAh Li-Po battery, USB-C port
- 4 customizable dashboards
- Functions: remaining BB counter, AEG battery level, estimated remaining shots, magazine counter, tilt indicator, bolt-catch reset, temperature, distance/pedometer/calories, fire mode notification, mission/respawn timer
- Compatible with Titan V2 / V2 NGRS / V3, Aster V2 / V3, Blu-Link, Basic / Advanced / Expert firmware; not compatible with GCS PC/Mac 2.x and basic MOSFETs
Specifications
- Dimensions: 47 × 60 × 54 mm
- Weight: 180 g
- Color: dark earth
Gate Statum Tactical Computer, Black
The Gate Statum tactical computer mounts on the replica and connects to the electronic trigger unit, displaying all important data in real time: remaining BBs, battery level, fire mode and more.
Features
- Connects to the replica electronic trigger units for complete real-time data
- 128 × 128 px OLED display with adjustable brightness
- Polycarbonate window coated with 3mk FlexibleGlass
- CNC-machined 7075 aluminum body, IP68 water and dust resistant, MIL-STD-810H standard
- Mounts on standard 20 mm rails
- 3-axis accelerometer and gyroscope
- Bluetooth 5.0 connection
- 850 mAh Li-Po battery, USB-C port
- 4 customizable dashboards
- Functions: remaining BB counter, AEG battery level, estimated remaining shots, magazine counter, tilt indicator, bolt-catch reset, temperature, distance/pedometer/calories, fire mode notification, mission/respawn timer
- Compatible with Titan V2 / V2 NGRS / V3, Aster V2 / V3, Blu-Link, Basic / Advanced / Expert firmware; not compatible with GCS PC/Mac 2.x and basic MOSFETs
Specifications
- Dimensions: 47 × 60 × 54 mm
- Weight: 180 g
- Color: black
Gate Titan II Bluetooth Expert for AEG V2, Front Wiring
Gate Titan II Bluetooth is the flagship Gate electronic trigger unit (ETU) for V2 gearboxes, in the version for AEG replicas with front wiring and Expert firmware. The optical trigger sensor and the innovative gear sensor provide extremely precise control of every cycle.
Features
- Expert firmware
- For V2 gearbox, front wiring, AEG
- Integrated Bluetooth 5.2: direct access to settings, telemetry, smartwatch, Statum and other Gate devices
- Patented gear sensor that detects every tooth and the direction of rotation, for very precise cycle control
- Optical trigger sensor: up to 50 sensitivity levels in the first millimeter
- Mechanical protection of the trigger sensors
- Ultra-precise telemetry thanks to the new current sensor
- Pre-cocking adjustable in percentages
- Built-in voltage boost converter, trouble-free operation at low temperatures
- Programmable multifunction port: tracer and sensors in the hop-up chamber, bolt-catch button, single solenoid HPA engine, electric magazine, magazine sensor, flashlight
- GCS app for iOS, Android, macOS, Windows, watchOS, Wear OS
- Deep sleep mode with consumption of only 0.1 mA
Gate Titan II Bluetooth Expert for AEG V2, Rear Wiring
Gate Titan II Bluetooth is the flagship Gate electronic trigger unit (ETU) for V2 gearboxes, in the version for AEG replicas with rear wiring and Expert firmware. The optical trigger sensor and the innovative gear sensor provide extremely precise control of every cycle.
Features
- Expert firmware
- For V2 gearbox, rear wiring, AEG
- Integrated Bluetooth 5.2: direct access to settings, telemetry, smartwatch, Statum and other Gate devices
- Patented gear sensor that detects every tooth and the direction of rotation, for very precise cycle control
- Optical trigger sensor: up to 50 sensitivity levels in the first millimeter
- Mechanical protection of the trigger sensors
- Ultra-precise telemetry thanks to the new current sensor
- Pre-cocking adjustable in percentages
- Built-in voltage boost converter, trouble-free operation at low temperatures
- Programmable multifunction port: tracer and sensors in the hop-up chamber, bolt-catch button, single solenoid HPA engine, electric magazine, magazine sensor, flashlight
- GCS app for iOS, Android, macOS, Windows, watchOS, Wear OS
- Deep sleep mode with consumption of only 0.1 mA
Gate Titan II Bluetooth Expert for HPA V2, Front Wiring
Gate Titan II Bluetooth is the flagship Gate electronic trigger unit (ETU) for V2 gearboxes, in the version for HPA systems with front wiring and Expert firmware. The optical trigger sensor and the innovative gear sensor provide extremely precise control of every cycle.
Features
- Expert firmware
- For V2 gearbox, front wiring, HPA
- Integrated Bluetooth 5.2: direct access to settings, telemetry, smartwatch, Statum and other Gate devices
- Patented gear sensor that detects every tooth and the direction of rotation, for very precise cycle control
- Optical trigger sensor: up to 50 sensitivity levels in the first millimeter
- Mechanical protection of the trigger sensors
- Ultra-precise telemetry thanks to the new current sensor
- Pre-cocking adjustable in percentages
- Built-in voltage boost converter, trouble-free operation at low temperatures
- Programmable multifunction port: tracer and sensors in the hop-up chamber, bolt-catch button, single solenoid HPA engine, electric magazine, magazine sensor, flashlight
- GCS app for iOS, Android, macOS, Windows, watchOS, Wear OS
- Deep sleep mode with consumption of only 0.1 mA
Gate Eon 13:1 CNC Gear Set for Airsoft Gearbox, Steel
The Gate Eon 13:1 CNC gear set is a set of CNC-machined steel gears for the gearbox of airsoft replicas. It is developed for reliability and high performance in intensive use.
Features
- High-quality CNC-machined steel gear set
- Designed for springs up to M160 in semi-auto and up to M140 in full-auto
- Compatible with modern brushed and brushless motors
- The precisely set position of the tappet plate pin allows the nozzle to open and close correctly
- The nozzle stays sealed longer with the hop-up rubber, for better FPS stability, especially in full auto
- Developed in collaboration between Gate Enterprise and Solink Motor
Specifications
- Gear ratio: 13:1
Gate Titan II Bluetooth Expert for HPA V2, Rear Wiring
Gate Titan II Bluetooth is the flagship Gate electronic trigger unit (ETU) for V2 gearboxes, in the version for HPA systems with rear wiring and Expert firmware. The optical trigger sensor and the innovative gear sensor provide extremely precise control of every cycle.
Features
- Expert firmware
- For V2 gearbox, rear wiring, HPA
- Integrated Bluetooth 5.2: direct access to settings, telemetry, smartwatch, Statum and other Gate devices
- Patented gear sensor that detects every tooth and the direction of rotation, for very precise cycle control
- Optical trigger sensor: up to 50 sensitivity levels in the first millimeter
- Mechanical protection of the trigger sensors
- Ultra-precise telemetry thanks to the new current sensor
- Pre-cocking adjustable in percentages
- Built-in voltage boost converter, trouble-free operation at low temperatures
- Programmable multifunction port: tracer and sensors in the hop-up chamber, bolt-catch button, single solenoid HPA engine, electric magazine, magazine sensor, flashlight
- GCS app for iOS, Android, macOS, Windows, watchOS, Wear OS
- Deep sleep mode with consumption of only 0.1 mA
Gate Eon 18:1 CNC Gear Set for Airsoft Gearbox, Steel
The Gate Eon 18:1 CNC gear set is a set of CNC-machined steel gears for the gearbox of airsoft replicas. It is developed for reliability and high performance in intensive use.
Features
- High-quality CNC-machined steel gear set
- Designed for springs up to M160 in semi-auto and up to M140 in full-auto
- Compatible with modern brushed and brushless motors
- The precisely set position of the tappet plate pin allows the nozzle to open and close correctly
- The nozzle stays sealed longer with the hop-up rubber, for better FPS stability, especially in full auto
- Developed in collaboration between Gate Enterprise and Solink Motor
Specifications
- Gear ratio: 18:1
Gate Titan V2 Advanced Set, Front Wiring
The Gate Titan V2 Advanced set contains the Titan drop-in MOSFET with Advanced firmware, in the version with front wiring, together with USB-Link. Titan is an electronic unit that replaces the trigger contacts and the cut-off lever, taking full control of the AEG replica.
The device should be installed by an experienced technician.
Features
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
- Programming from the trigger (basic functions), via USB-Link (included) or Blu-Link (sold separately)
Package Contents
- Titan V2 with Advanced firmware (front wiring)
- USB-Link
- USB-A – micro-USB cable (1.5 m)
- USB-C – micro-USB cable (0.6 m)
- Micro-USB – micro-USB cable (0.6 m)
- Installation kit
- Quick start guides (Titan and Blu-Link)
Gate Eon 13:1 short stroke CNC Gear Set for Airsoft Gearbox, Steel
The Gate Eon 13:1 short stroke CNC gear set is a set of CNC-machined steel gears for the gearbox of airsoft replicas. It is developed for reliability and high performance in intensive use.
Features
- High-quality CNC-machined steel gear set
- Designed for springs up to M160 in semi-auto and up to M140 in full-auto
- Compatible with modern brushed and brushless motors
- The precisely set position of the tappet plate pin allows the nozzle to open and close correctly
- The nozzle stays sealed longer with the hop-up rubber, for better FPS stability, especially in full auto
- Developed in collaboration between Gate Enterprise and Solink Motor
Specifications
- Gear ratio: 13:1
- Short stroke variant
Gate Titan V2 Advanced Set, Rear Wiring
The Gate Titan V2 Advanced set contains the Titan drop-in MOSFET with Advanced firmware, in the version with rear wiring, together with USB-Link. Titan is an electronic unit that replaces the trigger contacts and the cut-off lever, taking full control of the AEG replica.
The device should be installed by an experienced technician.
Features
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
- Programming from the trigger (basic functions), via USB-Link (included) or Blu-Link (sold separately)
Package Contents
- Titan V2 with Advanced firmware (rear wiring)
- USB-Link
- USB-A – micro-USB cable (1.5 m)
- USB-C – micro-USB cable (0.6 m)
- Micro-USB – micro-USB cable (0.6 m)
- Installation kit
- Quick start guides (Titan and Blu-Link)
Gate Titan V2 Basic for V2 Gearbox, Front Wiring
Gate Titan V2 Basic is designed for version 2 gearboxes with front wiring and comes with Basic firmware, which provides the basic functions. Titan is a drop-in MOSFET: an electronic unit that replaces the trigger contacts and the cut-off lever and takes full control of the AEG replica.
The basic functions are programmed from the trigger, and full configuration is done through Blu-Link or USB-Link (sold separately) and the Gate Control Station app. The device should be installed by an experienced technician.
Features
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
Package Contents
- Titan V2 with Basic firmware (front wiring)
- Installation kit
- Quick start guides
Gate Titan V2 Expert Blu Set, Front Wiring
The Gate Titan V2 Expert Blu set is designed for version 2 gearboxes with front wiring and includes Expert firmware with all available functions, plus the Blu-Link Bluetooth adapter. Titan is a drop-in MOSFET: an electronic unit that replaces the trigger contacts and the cut-off lever and takes full control of the AEG replica.
With the included Blu-Link you can wirelessly manage all settings from the Gate Control Station app; USB-Link is sold separately. The device should be installed by an experienced technician.
Features
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
Package Contents
- Titan V2 with Expert firmware (front wiring)
- Blu-Link
- Installation kit
- Connector set
- Quick start guides (Titan and Blu-Link)
- Titan patch
- PIN card
- Debug card
Gate Titan V2 Expert Blu Set, Rear Wiring
The Gate Titan V2 Expert Blu set is designed for version 2 gearboxes with rear wiring and includes Expert firmware with all available functions, plus the Blu-Link Bluetooth adapter. Titan is a drop-in MOSFET: an electronic unit that replaces the trigger contacts and the cut-off lever and takes full control of the AEG replica.
With the included Blu-Link you can wirelessly manage all settings from the Gate Control Station app; USB-Link is sold separately. The device should be installed by an experienced technician.
Features
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
Package Contents
- Titan V2 with Expert firmware (rear wiring)
- Blu-Link
- Installation kit
- Connector set
- Quick start guides (Titan and Blu-Link)
- Titan patch
- PIN card
- Debug card
Gate Titan V2 Expert for V2 Gearbox, Front Wiring
Gate Titan V2 Expert is designed for version 2 gearboxes with front wiring and has Expert firmware with all available functions. Titan is a drop-in MOSFET: an electronic unit that replaces the trigger contacts and the cut-off lever and takes full control of the AEG replica.
The basic functions are programmed from the trigger, and full configuration is done through Blu-Link or USB-Link (sold separately) and the Gate Control Station app. The device should be installed by an experienced technician.
Features
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
Gate Titan V2 Expert for NGRS, Front Wiring
Gate Titan V2 Expert for NGRS is designed for Tokyo Marui Next Generation (NGRS) gearboxes with front wiring and has Expert firmware with all available functions. Titan is a drop-in MOSFET: an electronic unit that replaces the trigger contacts and the cut-off lever and takes full control of the AEG replica.
The basic functions are programmed from the trigger, and full configuration is done through Blu-Link or USB-Link (sold separately) and the Gate Control Station app. The device should be installed by an experienced technician.
Features
- Compatible with Tokyo Marui Next Generation: M4, SCAR-H, SCAR-L, HK416D, HK416C, HK417
- Not compatible with Tokyo Marui Next Generation: 36C Custom, Model 36K, AKS74N, AKS74U, AK102, AK47 Type 3
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
Gate Titan V2 Expert for NGRS, Rear Wiring
Gate Titan V2 Expert for NGRS is designed for Tokyo Marui Next Generation (NGRS) gearboxes with rear wiring and has Expert firmware with all available functions. Titan is a drop-in MOSFET: an electronic unit that replaces the trigger contacts and the cut-off lever and takes full control of the AEG replica.
The basic functions are programmed from the trigger, and full configuration is done through Blu-Link or USB-Link (sold separately) and the Gate Control Station app. The device should be installed by an experienced technician.
Features
- Compatible with Tokyo Marui Next Generation: M4, SCAR-H, SCAR-L, HK416D, HK416C, HK417
- Not compatible with Tokyo Marui Next Generation: 36C Custom, Model 36K, AKS74N, AKS74U, AK102, AK47 Type 3
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
Gate Titan V3 Advanced Set for V3 Gearbox
The Gate Titan V3 Advanced set is designed for version 3 gearboxes with front or rear wiring and includes Advanced firmware together with USB-Link. Titan is a drop-in MOSFET: an electronic unit that replaces the trigger contacts and the cut-off lever and takes full control of the AEG replica.
The basic functions are programmed from the trigger, and through USB-Link (included) you have access to advanced settings in the Gate Control Station app; Blu-Link is sold separately. The device should be installed by an experienced technician.
Features
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
Package Contents
- Titan V3 with Advanced firmware
- USB-Link
- USB-A – micro-USB cable (1.5 m)
- USB-C – micro-USB cable (0.6 m)
- Micro-USB – micro-USB cable (0.6 m)
- Installation kit
- Quick start guides (Titan and Blu-Link)
Gate Titan V3 Expert for V3 Gearbox
Gate Titan V3 Expert is designed for version 3 gearboxes with front or rear wiring and has Expert firmware with all available functions. Titan is a drop-in MOSFET: an electronic unit that replaces the trigger contacts and the cut-off lever and takes full control of the AEG replica.
The basic functions are programmed from the trigger, and full configuration is done through Blu-Link or USB-Link (sold separately) and the Gate Control Station app. The device should be installed by an experienced technician.
Features
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
Gate Titan V3 Expert Blu Set for V3 Gearbox
The Gate Titan V3 Expert Blu set is designed for version 3 gearboxes with front or rear wiring and includes Expert firmware plus the Blu-Link Bluetooth adapter. Titan is a drop-in MOSFET: an electronic unit that replaces the trigger contacts and the cut-off lever and takes full control of the AEG replica.
With the included Blu-Link you can wirelessly manage all settings from the Gate Control Station app; USB-Link is sold separately. The device should be installed by an experienced technician.
Features
- Third-generation MOSFET
- Trigger sensitivity adjustment
- Configurable fire selector
- Adaptive active brake
- Cycle detection, pre-cocking
- ROF control and stabilization
- Sniper delay, smart trigger, AUG mode, equalizer
- Battery protection and low battery warning
- Electronic fuse and smart fuse
- 1–5 BB burst, debouncing, built-in self-test, dark mode
- Fixed wiring, Dean-T ready, mini-Tamiya adapter
- Compatible with 14.8 V Li-Po
Package Contents
- Titan V3 with Expert firmware (rear and front wiring)
- Blu-Link
- Installation kit
- Connector set
- Quick start guides (Titan and Blu-Link)
- Titan patch
- PIN card
- Debug card
Gate USB-Link 2 Adapter
Gate USB-Link 2 is a dongle that connects Gate ETU units to PC, Mac and Android devices. Together with the Gate Control Station app it provides full access to the functions and settings of Titan or Aster and allows updating the firmware of the drop-in module and the tactical programming card.
Features
- Connecting Gate ETU to PC, Mac and Android
- Full access to Titan and Aster settings
- Firmware updates
Package Contents
- USB-Link for the GCS app
- USB-C cable (0.6 m)
- Micro-USB cable (0.6 m)
- Debug card
- Quick start guide
Gate Warfet 1.1 MOSFET with Programming Card
Gate Warfet 1.1 is an advanced control system for AEG replicas. Thanks to the mini Tamiya adapter it connects very easily to the original wiring, and configuration is simple with the included tactical programming card.
Features
- Third-generation MOSFET
- Configurable fire selector
- Active brake
- Pre-cocking
- ROF control
- Smart trigger
- Battery protection
- Electronic fuse and smart fuse
- Plug & play
- 1–5 BB burst
- Debouncing, built-in self-test, dark mode
- Protective coating, fixed wiring, Dean-T ready
- Compatible with 14.8 V Li-Po
Package Contents
- Warfet power module
- Tactical programming card
- Mini Tamiya adapter for battery
- Mini Tamiya adapter for AEG
- Pair of Dean-T connectors
- Single wire for trigger
- Dual wire for trigger
- Quick start guide
Gate Warfet Power Module
The Gate Warfet power module is an advanced control system for AEG replicas that connects easily to the original wiring via the mini Tamiya adapter. Configuration is done with the tactical programming card, sold separately.
Features
- Third-generation MOSFET
- Configurable fire selector
- Active brake
- Pre-cocking
- ROF control
- Smart trigger
- Battery protection
- Electronic fuse and smart fuse
- Plug & play
- 1–5 BB burst
- Debouncing, built-in self-test, dark mode
- Protective coating, fixed wiring, Dean-T ready
- Compatible with 14.8 V Li-Po
Package Contents
- Warfet power module
- Mini Tamiya adapter for battery
- Mini Tamiya adapter for AEG
- Pair of Dean-T connectors
- Single wire for trigger
- Dual wire for trigger
- Tactical programming card not included
Gate X-ASR2 MOSFET
Gate X-ASR2 is the newest version of the well-known X-ASR MOSFET. It heats up much less, although it can operate at higher loads, including with M150 springs or stronger. Each time the battery is connected it performs a self-test and signals the operating status and any errors with two LEDs.
Features
- Increased maximum load
- Reduced heating during operation
- LEDs for device status
- Protective conformal coating
- Easy installation, mounted on the connectors
- No reverse polarity protection - be careful when connecting the battery
Package Contents
- X-ASR2
- Debug card
- Connector set
